CO's

BS101/M-I - Engineering Mathematics-I

C101.1

Understand the concepts of mathematics to compete in basic sciences.

C101.2

Apply the basic concepts of logarithm, complex number, quadratic equation and binomial theorem for solving the engineering and practical problems.

C101.3

Find the solutions of vector oriented problems like work done, moment etc by applying vector algebra.

C101.4

Simplify trigonometric expressions and solve trigonometric equations which will be useful in solving the scientific problems.

C101.5

Analyze limit, continuity, derivatives of different functions and physical interpretation of derivatives which will be applicable in real situation.

BS103 - Applied Physics-I

C102.1

Estimate errors in the measurement of physical quantities.

C102.2

Apply the knowledge of force and motion to solve basic engineering problems.

C102.3

Apply the knowledge of work, power and energy to solve basic engineering problems.

C102.4

Learn the basics of heat and thermometry.

C102.5

Understand the concepts of elasticity, surface tension and fluid mechanics.

BS105 - Applied Chemistry

C103.1

Understand the basic concepts of atomic structure & chemical bonding and solve various engineering problems applying the basic knowledge of atomic structure and chemical bonding.

C103.2

Know the related problems due to hardness of water and its significance in industry and daily life and the different techniques of softening of water and the quality parameters of drinking water.

C103.3

Apply the various instrumental techniques for identification and characterization of the engineering materials & understand their properties & applications.

C103.4

Understand the usefulness of relevant fuel and lubricants for domestic and industrial applications.

C103.5

Apply the electrochemical principles in batteries, fuel and solar cells and in different corrosion preventive measurements.

HS 101 - Communication Skills in English

C104.1

Develop confidence in communication in English language with knowledge of basic mechanism and rules.

C104.2

Improve four types of communication skills i.e listening, speaking, reading and writing skills.

C104.3

Understand the need for personality development focusing employability skills, leadership skills etc.

NIL - Engineering Graphics

C105.1

Develop drafting and sketching skills, to know the applications of drawing equipment and get familiarize with Indian Standards related to engineering drawing.

C105.2

Develop sense of Scale and Draw and interpret the dimension of given figure.

C105.3

Construct different Engineering curves and recognize their applications.

C105.4

Develop concept of Orthographic Projection and to draw Orthographic Views for different objects & To visualize three dimensional objects from Orthographic Views and to draw isometric views/projections.

C105.5

Develop the skills of drafting in AutoCAD by using different commands.

NIL - Engineering Workshop Practice

C106.1

Read and interpret job drawings.

C106.2

Acquaint with the specifications on all raw materials, tools and equipments used.

C106.3

Prepare the job using tools in different shops to perform various operations according to drawing.

C106.4

Adopt safe working practice.

C106.5

Acquaint with the maintenance of workshop tools, equipment and machineries.

BS107 - Applied Physics-I Labs

C107.1

Select right kind of measuring tools (Vernier caliper, Screw gauge, Spherometer etc.) for determining dimensions of physical quantities and make measurements with accuracy and precision.

C107.2

Understand the role of friction and measure co-efficient of friction between different surfaces.

C107.3

Describe and verify different laws such as Hook’s Law in elasticity and Stoke’s Law in viscosity.

C107.4

Understand rotational motion and determine M.I. of a rotating body (flywheel).

C107.5

Understand how materials expand on heating and determine linear expansion coefficient for a given material rod.

C107.6

Understand working and use of various apparatus (Thermometer, Fortin’s barometer, Simple Balance etc.)

BS109 - Applied Chemistry Lab

C108.1

Develop proficiency in performing essential laboratory techniques and procedures such as solution preparation, titrations, distillations, and qualitative analysis with a primary focus on safety in a cooperative manner as a team.

C108.2

Apply basic techniques used in chemistry laboratory for volumetric analysis of acid-base titrations and redox titrations with appropriate indicators.

C108.3

Learn to apply theoretical knowledge to practical applications in the laboratory with quality control measures such as total hardness of water, total acid number of lubricating oil and moisture content in coal.

C108.4

Understand the operating principles, calibration, and measurement procedures of standard laboratory instruments and equipment such as pH meters, conductivity meters, electrochemical cell.

C108.5

Understand the significance of measuring dissolved oxygen in water for the well-being of aquatic ecosystems and arsenic contamination in water and the potential health risks associated with it by carrying out qualitative tests in the laboratory.

HS103 - Sports and Yoga

C109.1

Understand the importance of sound health and fitness principles as they relate to better health.

C109.2

Perform a variety of physical and yogic activities aimed at stimulating their continued inquiry about Yoga, physical education, health and fitness.

C109.3

Create a safe, progressive, methodical and efficient activity based plan to enhance improvement and minimize risk of injury.

C109.4

Appreciate physical activity as a lifetime pursuit and a means to better health.

HS105 - Communication Skills in English - Lab

C110.3

Develop personality for handling personal and career challenges, leadership skills, etc.

C110.1

Develop speaking skills with focus on correct pronunciation and fluency.

C110.2

Develop reading , writing and listening skills for enhancing communication.

BS102/M-II - Engineering Mathematics-II

C111.1

Apply the knowledge of Cramer's rule and matrix inversion for finding the solutions of Linear Simultaneous Equations.

C111.2

Apply the equations of a straight line, circle, conic section in solving the practical problems.

C111.3

Apply the various techniques of evaluating integration and various methods of finding complete primitive of ordinary differential equations of 1st order and second order for solving engineering problems.

C111.4

Use the concept of partial differentiation in solving physical problems.

C111.5

Analyze the Statistics and Probability in a real situation.

BS104 - Applied Physics –II

C112.1

Apply the knowledge of SHM, Wave Motion and Acoustics to solve basic engineering problems.

C112.2

Understand the basic optical laws and image formation by lenses.

C112.3

Apply the knowledge of Electrostatics, Current Electricity and Electromagnetism to solve basic engineering problems.

C112.4

Understand the operation and applications of a P-N junction diode.

C112.5

Understand the basics of Bohr atom model, X-Ray, Laser, Fibre Optics and Nanotechnology.

ES 102 - Introduction to IT Systems

C113.1

Describe basic internet skills, number system and codes, and various computer hardware components.

C113.2

Explain an operating system, its importance, and the necessity for flowcharts and algorithms to handle common problems.

C113.3

Apply the concept of HTML, CSS and JavaScript in designing web pages and websites.

C113.4

Use the Internet safely, legally, and responsibly being aware of different security measures.

NIL - FUNDAMENTAL OF ELECTRICAL & ELECTRONICS ENGINEERING (FEEE)

C114.1

Realize the concept and use of different Electrical and Electronics components.

C114.2

Understand the basics of electrical and electronics engineering principles.

C114.3

Understand the basics of AC circuits, Transformers and Machines.

C114.4

Realize the fundamental principle of Semiconductor, P-N junction Diode ,Transistor and OP-AMP.

C114.5

Understand the functions of basic Digital Logic Gates.

NIL - Engineering Mechanics

C115.1

Identify the force systems for given conditions by applying the basics of mechanics and determine unknown force(s) of different engineering system.

C115.2

Find the centre of gravity of composite solids and centroid of composite plain figures.

C115.3

Apply and analyze problems associated with frictional forces in horizontal and inclined plane.

C115.4

Understand the fundamental law of machine and calculate the efficiency, mechanical advantage & velocity ratio of various simple lifting machines.

C115.5

Know the fundamental laws of motion and their applications to various engineering problems.

BS106 - Applied Physics II Lab

C116.1

Apply concept of oscillation and determine the time period of oscillation of a cantilever problems.

C116.2

Verify optical laws and determine focal length and magnifying power of optical lenses.

C116.3

Understand and verify electrical laws like Ohm’s law for flow of current and Kirchhoff’s law governing electrical circuits

C116.4

Verify laws of series and parallel combination of resistances.

C116.5

Measure resistance of a galvanometer and how it is converted into an ammeter and voltmeter.

C116.6

Investigate characteristics of semiconductor diodes, photoelectric cells and determine operational parameters associated with their performance

ES 102 - Introduction to IT Systems Lab

C117.1

Identify the different components of computer, install and configure OS, assemble a PC and connect it to external devices.

C117.2

Use internet applications, browse websites and avail e-services of government

C117.3

Apply the concept of HTML, CSS in designing web pages and websites.

C117.4

Prepare Word documents, worksheets, and presentations using MS-Office

C117.5

Use various Google applications in different aspects.

NIL - FUNDAMENTAL OF ELECTRICAL & ELECTRONICS ENGINEERING (FEEE) (Laboratory)

C118.1

Understand measuring voltage, current, power and power factor in AC circuit along with phasor diagram.

C118.2

Identify different parts of a single-phase transformer, A.C./D.C. Motor.

C118.3

Identify various active and passive electronic components in a given circuit and measuring resistance, inductance and capacitance.

C118.4

Experiment with PN-diode, transisitor in CE mode and operational amplifier.

C118.5

Realise the truth table of logic gates and verification of D'Morgan's Theorem.

NIL - Engineering Mechanics Lab

C119.1

Find the coefficient of friction for different surfaces in various conditions.

C119.2

Determine MA, VR & efficiency of various lifting machines with their applications & verify fundamental laws of machine.

C119.3

Determine the resultant of various forces of different engineering systems.

AU 302 - Indian Constitution

C120.1

Understand historical context of the formation of the Indian Constitution, its importance in establishing a democratic India and basic structure of Indian Constitution.

C120.2

Understand the importance of the fundamental rights and duties to be a good citizen of India and at the same time fulfil the responsibilities in building a better nation.

C120.3

Learn about the structure and functions of the Union Executive, including the role and power of President, Prime Minister, Council of Ministers and about the functioning of the Indian Parliament, including the Lok Sabha and Rajya Sabha.

C120.4

Understand the functions of state-level government structure, local administration, and the principles of decentralization of power between central, state and local self-governance in India.

C120.5

Understand the role, functions, and significance of the Election Commission as an independent and impartial body in India's democracy.

MEPC201 - Mechanical Engineering Drawing

C201.1

Comprehend the methods of development of lateral surfaces of different truncated and frustum objects such as tray, funnel, hopper, bend pipe, transition pieces, etc.

C201.2

Realise the curves of intersection of commonly used two interpenetrating solids. Which are useful to design different pipe joints.

C201.3

Interpret machining symbols and surface texture on production drawings.

C201.4

Interpret various drawing symbols, codes and conventions as per IS: SP-46

C201.5

Realise the sectional views of various casting / machining components

C201.6

Interpret assembly drawing and detailed drawings of various objects such as machine tool parts, power transmission elements, bearings, valves etc.

MEPC203 - Mechanical Engineering Materials

C202.1

Apply the knowledge the classification of materials, crystal structure and properties of materials.

C202.2

Interpret the phase diagrams of materials, transformation across various regions, pearlite transformation, TTT Diagram.

C202.3

Select suitable heat-treatment process to achieve desired properties of metals and improving their mechanical properties.

C202.4

Describe the ferrous, non-ferrous metals, cutting tool materials, and composites along with their properties and applications.

C202.5

Understand non-destructive testing methods & its applications.

MEPC205 - Strength of Materials

C203.1

Demonstrate different types of stress induced on components under the action of different types of loading condition.

C203.2

Interpret the variation of MOI for different cross-sections of mechanical components.

C203.3

Determine Stresses, deformations in the simple load carrying members subjected to an axial, transverse, radial, twisting or thermal loading

C203.4

Draw shear force and bending moment diagrams for beams with different support conditions and different load conditions

C203.5

Analyse both solid and hollow shaft subjected to torsion and Demonstrate different terminology of springs & concept of deflection under axial loading.

C203.6

Solve the problems of column for different end conditions using different methods like Euler's Formula & Rankine-Gordon formula.

MEPC207 - Manufacturing Processes-I

C204.1

Understand the fundamental concept of manufacturing and identify different manufacturing processes to be performed for the given job.

C204.2

Understand the preparation of products using different metal forming processes.

C204.3

Plan, estimate and produce jobs by using the Lathe.

C204.4

Understand the preparation of different products using different casting processes.

C204.5

Assess and apply different metal joining processes to produce jobs.

MEPC209 - Thermal Engineering -I

C205.1

Understand fundamental concepts of thermodynamics such as thermodynamic systems, processes, point function and path function, heat and work and laws of thermodynamics.

C205.2

Learn the application of 1st law of thermodynamics on open system and on closed system containing ideal gas executing thermodynamic processes.

C205.3

Understand various gas laws, general gas equation and characteristic gas equation, characteristic and universal gas constants, P-V and T-S diagram, P-V-T relationship, work done, change in internal energy, enthalpy and entropy and heat supplied to the gas for various non-flow reversible processes.

C205.4

Understand the steam formation, various terms on steam, use of Steam Table and Mollier Diagram to solve simple numerical on properties of steam, to determine the dryness fraction of steam by various calorimeters.

C205.5

Understand the working of different types of boilers, functions of boiler mountings and accessories, boiler performance and boiler draught.

MEPC211 - Mechanical Engineering Drawing Practice

C206.1

Draw the development of lateral surfaces of different truncated and frustum objects, such as tray, funnel, hopper, bend pipe, transition pieces, etc.

C206.2

Draw the curves of intersection of commonly used two interpenetrating solids.

C206.3

Exercise various drawing symbols, codes and conventions as per IS: SP-46.

C206.4

Apply machining symbols and surface texture on production drawings

C206.5

Draw the sectional views of various casting / machining components

C206.6

Draw assembly drawing and detailed drawings of various objects such as machine tool parts, machine components, power transmission elements, bearings, valves etc.

MEPC213 - Materials Testing Lab

C207.1

Measure the impact strength of given materials by using relevant material testing equipment

C207.2

Measure the hardness of given materials by using relevant material testing equipment

C207.3

Measure the tensile, compressive & shear strength of given materials by using relevant material testing equipment

MEPC215 - Thermal Engineering -I Lab

C208.1

Observe the working principle of Bourdon tube pressure gauge.

C208.2

Calculate the characteristic gas constant of air using some practical data.

C208.3

Study and Understand the Cochran Boiler (fire tube boiler)

C208.4

Study and understand the Babcock and Wilcox Boiler (water tube tube boiler)

C208.5

Study and understand the boiler mountings and accessories.

MEPC217 - Manufacturing Processes -I Practice

C209.1

Set the tools, jobs and different parameters to operate a Lathe machine and create any component.

C209.2

Set different parameters, operate and create welded joints using Arc welding Setup.

C209.3

Practice on making a mould by using a solid or split pattern.

SI201 - Internship-I

C210.1

Apply appropriate workplace behaviors in a professional setting.

C210.2

Exhibit evidence of increased content knowledge gained through practical experience.

C210.3

Understand Real-World Application.

C210.4

Learn about career positions and occupations along with the qualities and training required to obtain those positions.

MEPC202 - Theory of Machine

C211.1

Understand fundamentals of mechanisms and the working principle for different types of mechanism used in different machines.

C211.2

Understand power transmission by belt drives and gear drives, velocity ratio for different types of gear train and select specific mechanical power transmission drives for given application.

C211.3

Understand functions of Flywheel and Governors, determine the mass of flywheel required for given crank-effort diagram of an engine / machine, determine the speed of different types of Governors in different cases.

C211.4

Draw the profile of radial cam for transmitting given motion of different followers, will be able to understand balancing of Rotating Masses & Vibrations.

C211.5

Understand functions and types of brakes and clutches, construction and working of different types of brakes and clutches and their field of application.

MEPE202/1 - Program Elective ( Refrigeration & Air Conditioning)

C212.1

Understand and analyze the fundamental concept of refrigeration processes.

C212.2

Understand and apply the concept of air refrigeration system.

C212.3

Learn about refrigerants, their properties. Understand and apply the concept of VCR systems.

C212.4

Understand the fundamental concept of VAR systems.

C212.5

Understand the fundamental concept of psychrometry and its implementation in air conditioning systems to have a comfortable room condition.

MEPC204 - Manufacturing Process-II

C213.1

Explain the basics of drilling machine, its uses and different operations performed on it.

C213.2

Apply the knowledge of shaper and planner machine to plan, estimate and produce jobs.

C213.3

Explain the basics of milling machine, its classifications and different uses.

C213.4

Explain the basics of gear cutting methods and the procedure of making spur gears by using suitable operations.

C213.5

Explain the principles of grinding, importance of surface finish and related techniques.

C213.6

Explain the fundamental concept of powder metallurgy and its application.

MEPC206 - Thermal Engineering-II

C214.1

Differentiate fundamental differences between Carnot Gas Power Cycle & Carnot Vapour Power cycle which will help them to understand different steam cycles used in steam power plant.

C214.2

Define the purpose of different types of Steam Condenser used in steam power plant & explain their working principle.

C214.3

Explain the working principles of different types of air compressor used in industry

C214.4

Explain the working principle of different types of Refrigeration system.

C214.5

State the basics of heat transfer & apply this knowledge to explain the working principle of heat exchangers used in industry.

MEPC208 - Engineering Metrology

C215.1

Learn various objectives of metrology and measurements and the importance of limit,fit, tolerance in manufacturing of components.

C215.2

Classify different types of linear and angular measurements used in inspection and compare them

C215.3

Utilize the principles of limit gauges and understand its importance in Inspection in Industries.

C215.4

Explain the Working principle of comparators and classify its different types.

C215.5

Learn different terminologies of Screw thread, gear and measure their characteristic dimensions.

C215.6

Learn about surface textures and different techniques to measure surface roughness.

MEPC210 - Computer Aided Machine Drawing Practice

C216.1

Understand the use of computer aided drafting commands.

C216.2

Draw two dimensional views of different machine elements related to mechanical Engineering

C216.3

Draw 3-D modeling of different Elements.

MEPC212 - Thermal Engineering-II Lab

C217.1

Draw and explain labelled schematic diagram of a Steam power plant showing different units.

C217.2

Explain the working principle of an Air compressor and identify different components of it.

C217.3

Explain the working principle of an evaporative condenser and identify different components of it.

C217.4

Explain the working principle of a vapour compression refrigeration system and identify different components of it.

MEPC214 - Engineering Metrology and Mechanical Measurement Lab

C218.1

Understand the principle and perform various Linear measurement experiment using proper instruments/gauges.

C218.2

Understand the principle and perform various Angular measurements using proper instruments/gauges.

C218.3

Understand the principle and perform various measurements on a Spur gear by gear tooth Vernier.

C218.4

Perform circularity/roundness test by using a Comparator (Dial Indicator)

MEPC216 - Manufacturing Processes-II Practice

C219.1

Develop a job in drilling machine involving setup of machine, selection of tools & equipments as required and skill of operating the machine tool

C219.2

Develop a job in shaping machine involving setup of machine, selection of tools & equipments as required and skill of operating the machine tool.

C219.3

Develop a job in milling machine involving setup of machine, selection of tools & equipments as required and skill of operating the machine tool.

C219.4

Develop a job in grinding machine involving flat surface grinding and skill of operating the machine tool.

PR202 - Minor Project

C220.1

Identify, analyze & define the problem statement

C220.2

Generate ideas with feasible solutions for the identified problem.

C220.3

Execute (design, develop, manufacture & operate equipment/program), data recording, analyze and generate conclusion to the problem statement.

MEPC301 - Power Engineering

C301.3

Understand the construction and working of various types of steam turbines and its application.

C301.4

Understand the working of Gas Turbine & its application and analyze the basic principle of Jet Propulsion.

C301.5

Understand working of Hydraulic Turbines and their application in actual power generation.

C301.1

Understand the fundamental concept, Identify different components and analyze various performance characteristics of IC Engines.

C301.2

Understand the working principle of steam nozzles and diffusers.

MEPC303 - Advanced Manufacturing Processes

C302.1

Classify different types of Non-traditional Machining process & demonstrate the working principle, Advantages, Disadvantages, application

C302.2

Compare Jigs & Fixtures, Classify & demonstrate different types of jigs & fixtures.

C302.4

Illustrate the concept of Flexible manufacturing system, their components, advantages & disadvantages.

MEPC309 - Fluid Mechanics and Machinery

C303.1

Understand the concept of fluid and various properties of fluid.

C303.2

Understand the fundamental equation of fluid statics, to calculate the total pressure force on plane vertical and inclined surfaces submerged into a static liquid and to measure pressure using various manometers.

C303.3

Understand the concept of various types of fluid flow, continuity equation and Bernoulli’s theorem and their applications, measurement of discharge through pipelines by orifice meter and venturimeter and measurement of velocity by pitot tube.

C303.4

Calculate energy losses in pipe flow and to draw hydraulic gradient line and total energy line,will be able to calculate the force exerted by a jet of liquid on a fixed vertical flat plate, moving vertical flat plate, fixed curved vane and moving curved vane.

C303.5

Understand the concept of centrifugal pump regarding its construction, working principle, application, priming, different heads and efficiencies and the construction and working principle of submersible and jet pump.

C303.6

Understand the concept of reciprocating pump regarding its construction, working principle, application, slip and indicator diagram.

MEPE301/1 - Program Elective (without Lab) ( Power Plant Engineering)

C304/1.1

Know about the current nation-wise and global power scenario and to explain general criterions for building a power plant.

C304/1.2

Explain the layout, safety, and Identify and describe the function of major components associated with a coal based thermal power plant.

C304/1.3

Explain the layout and Identify and describe the function of major components associated with Diesel Engine thermal power plant.

C304/1.4

Explain the layout ,safety and Identify and describe the function of major components associated with Nuclear power plant.

C304/1.5

Know about the advantages, limitations, future scope and several techniques of non conventional power generation.

C304/1.6

Explain the basic economics associated with power plant.

MEPE301/2 - Program Elective (without Lab) (Material Handling System)

C304/2.1

Understand constructional & operational features of various materials handling systems.

C304/2.2

Understand different material handling processes used in industries.

C304/2.3

Identify, compare & select proper material handling equipment for specified applications.

C304/2.4

Appreciate the role of material handling devices in mechanization and automation of industrial process.

MEPE303/2 - Program Elective (with Lab) (Automobile Engineering)

C305.1

Identify various systems equipped with a vehicle.

C305.2

Explain the working of fuel feed systems, cooling & lubrication systems used in automobile and identify their main components.

C305.3

Explain how transmission system of an automobile works & identify its various parts.

C305.4

Explain the construction and working of steering, braking, wheel-tyre & suspension system.

C305.5

Explain the construction and working of different starting, ignition & charging systems of an automobile.

MEPC311 - Power Engineering Lab

C306.1

Understand the basic terminology and functions of Internal Combustion Engines.

C306.2

Interpret and analyze different operations of Internal Combustion Engines.

C306.3

Understand the concept of standardization in selecting standard components applied to cooling and lubrication system.

C306.4

Understand the basic terminology, concep and functions of water turbine and Hydroelectric Power Plant.

MEPC313 - Advance Manufacturing Processes Lab

C307.1

Explain the fundamental concept, demonstrate the necessity, working principle and identify the specific application of Non-Traditional Machining process.

C307.2

Demonstrate the utility and select suitable jig or fixture for making a product economically.

C307.3

Illustrate basic concept of NC-CNC machine and should able to produce specific job using CNC Machine tool.

MEPC315 - Fluid Mechanics and Machinery Lab

C308.1

Demonstrate the method of calibration of Bourdon tube pressure gauge with the help of Dead Weight Pressure gauge.

C308.2

Perform the method of verification of Bernoulli’s theorem.

C308.3

Demonstrate the method of determination of coefficient of discharge of Venturimeter and orificemeter.

C308.4

Perform the method of determination of coefficient of friction for flow through pipes.

C308.5

Experiment and demonstrate on centrifugal pump to determine its overall efficiency.

MEPE305/2 - Program Elective Lab (Automobile Engineering)

C309.1

Explain the working principle of a 4-stroke petrol engine using a cut section model and identify different components of it.

C309.2

Demonstrate the working principle of a differential gear box using a cut section model.

C309.3

Demonstrate the working principle of a transmission gear box using a cut section model.

C309.4

Explain the working principle of rack & pinion type steering gear box.

C309.5

Demonstrate the working principle of braking system (hydraulic/pneumatic) used in light/medium duty vehicle.

PR301 - Major Project-I

C310.1

Use literature to identify the objective, scope and the concept of the work.

C310.2

Select, collect and use required information / knowledge to solve the identified problem.

C310.4

Develop a prototype/experimental set-up necessary to complete the project

SI301 - Internship - II

C311.1

Apply appropriate workplace behaviors in a professional setting

C311.2

Exhibit evidence of increased content knowledge gained through practical experience

C311.3

Understand Real-World Application.

C311.4

Learn about career positions and occupations along with the qualities and training required to obtain those positions.

MEPC302 - Design of Machine Elements

C312.1

Demonstrate basics of Design principle; causes of stress concentration in mechanical elements, their remedies; Demonstrate effect of different types of fluctuating loads applied on mechanical member (Beams).

C312.2

Design mechanical joint & demonstrate their practical application

C312.3

Design shaft, coupling & pulley.

C312.4

Analyze different types of fasteners, permanent & temporary joints with simple problems & their application, advantages & disadvantages.

C312.5

Explain various types of bearings, their properties, application & selection of particular type of bearing for particular Application.

C312.6

Estimate & calculate total production cost of different mechanical elements

MEPC304 - Work, Organization & Management

C313.1

Understand the concept of management and organizational structure.

C313.2

Understand and apply the techniques of Human Resource Management, Materials Management and Inventory control.

C313.4

Understand and apply the techniques of Production Planning and Control.

C313.5

Understand and apply the techniques of Inspection, Quality Control and Total Quality Management (TQM).

MEPE302/2 - Program Elective (with Lab) (Oil Hydraulics & Pneumatics)

C314.1

Explain the construction, working principle & symbol of different components used in a Hydraulic system.

C314.2

Prepare Hydraulic circuits using different components of a Hydraulic system.

C314.3

Explain the construction, working principle & symbol of different components in a Pneumatic system.

C314.4

Prepare Pneumatic circuits using different components used of a Pneumatic system.

HS302 - Entrepreneurship and Start-ups

C315.1

Identify qualities of entrepreneurs, develop awareness about entrepreneurial skill and mindset and express knowledge about the suitable forms of ownership for small business.

C315.2

Comprehend the basics of Business idea, Business plan, Feasibility Study report, Project Report and Project Proposal.

C315.3

Understand the concept of start-up business and recognise its challenges within legal framework and compliance issues related to business.

C315.4

Make a Growth Plan and pitch it to all stakeholders and compare the various sources of funds available for start-up businesses.

MEOE302 - Engineering Economics & Project Management

C316.1

Acquire knowledge of basic economics to facilitate the process of economic decision making.

C316.2

acquire knowledge on basic financial management aspects.

C316.3

Develop the idea of project plan, from defining and confirming the project goals and objectives, identifying tasks and how goals will be achieved, management skills.

MEOE304/2 - Open Elective (Environment Science & Engineering)

C317.1

Recognize the relevance and the concept of Environmental Science and Engineering and different world-wide activities on this area.

C317.2

Illustrate the different types of water & air pollutants, their effects and their sustainable solutions.

C317.3

Classify different types of solid wastes & explain solid waste management processes.

C317.4

Demonstrate different types of soil pollution techniques & soil pollution management process.

C317.5

Tell the basic idea about conventional and non-conventional energy resources & illustrate different non-conventional energy resources, their advantages & disadvantages

C317.6

State the environmental regulations act. and standards.

MEPE304/2 - Program Elective Lab (Oil Hydraulics & Pneumatics)

C318.1

Identify the function of various components of Oil hydraulic systems and explain their working principle.

C318.2

Identify the function of various components of Pneumatic systems and explain their working principle.

C318.3

Develop simple oil hydraulic and pneumatic circuits for specific requirement.

PR302 - Major Project-II

C319.1

Implement the planned activity individually and / or as team.

C319.2

Justify ethical principles in engineering practices.

C319.3

Interpret the findings with appropriate technological / research citation.

C319.4

Prepare project report and power point presentation using appropriate tools.

SE302 - Seminar

C320.1

Choose any topic and explain that particular topic of interest

C320.2

Operate Microsoft Word and power point application effectively.

C320.3

Improve their presentation and communication skills.